Español
Português
Francés
Русский
العربية
한국어
हिंदी
ภาษาไทย
Italiano
Industry News
Sources of Fat in Pet FoodGrease is a general term for fat and oil. It is one of the main nutrients in pet food. The chemical elements contained in grease are mainly C, H, O, and some also contain N, P and other elements. The grease in pet food provides fat for pets. For pets, fat is an important
2024/06/27 14:50
In the production process of puffed food, uneven product discharge and spraying often occur, which affects the puffing degree and effect. Today, I will share with you some troubleshooting methods.First point: Control of puffing equipmentDifferent puffing equipment has different puffing degrees.
2024/06/14 18:06
Common Troubleshooting of Twin Screw ExtruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin screw in the barrel. When the equipment is running, the material enters the material chamber through the feeding port, and the screw rotates and extrudes forward to
2024/05/29 20:11
Oils and Fats in Pet Food ProductionThe oils and fats in pet food provide fat for pets. For pets, fat is an important component of pet body tissues. Fat is found in the skin, bones, muscles, nerves, blood, and internal organs of pets. Most lipids are important components of cell membranes, and
2024/05/29 20:11
The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying,
2024/05/13 16:55
Environmentally Friendly Degradable Material---Starch Based Packing FillersWith the increasing awareness of environmental protection, more and more people are paying attention to the issue of degradable materials. Today, let us learn about a new type of degradable material - starch-based, and see
2024/05/08 10:41
The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust,
2024/04/22 16:52
Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat
2024/04/19 10:05
dog food extruderThe dog food can be turned into many different shapes of dog food, and can be customized with different flavors. The raw materials are formed after high temperature and high pressure treatment, which is suitable for mass production and sales. Dog food equipment can realize
2024/04/03 11:19
The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion Coefficient
The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much
2024/03/28 10:09
The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be
2024/03/15 13:54
Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be
2024/02/18 22:54
Submitted successfully
We will contact you as soon as possible
Close