Español
Português
Francés
Русский
العربية
한국어
हिंदी
ภาษาไทย
Italiano
Environmentally Friendly Degradable Material---Starch Based Packing FillersWith the increasing awareness of environmental protection, more and more people are paying attention to the issue of degradable materials. Today, let us learn about a new type of degradable material - starch-based, and see…
2024/05/08 10:41
The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust,…
2024/04/22 16:52
Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat…
2024/04/19 10:05
Activity of Jinan Bright MachineryOn April 30, the company held a badminton competition at a nearby venue. Colleagues enthusiastically signed up to participate in the event. The whole process went very smoothly and the atmosphere was very lively. This was undoubtedly a very successful event.Team…
2024/04/19 10:05
dog food extruderThe dog food can be turned into many different shapes of dog food, and can be customized with different flavors. The raw materials are formed after high temperature and high pressure treatment, which is suitable for mass production and sales. Dog food equipment can realize…
2024/04/03 11:19
The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion Coefficient
The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much…
2024/03/28 10:09
Twin Screw Fish Feed ExtruderOn April 5, the twin-screw fish feed extruder purchased by the Indian agent was successfully shipped. So, why do more and more customers choose twin-screw extruders? Let's analyze it.Advantages of twin-screw extruder：The function of the extruder screw is to push the…
2024/03/28 10:09
The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be…
2024/03/15 13:54
Advantages of Puffed Floating Fish Feed1. Easy feeding and management to reduce diseasesExtruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water…
2024/03/08 10:12
Snack Food Machine Feed Production Machine CertificationThe ISO certification audit team came to our factory to meet and communicate about our company's quality management system.In this meeting, the company's CEO Mr. Xu emphasized that the quality management system is the basic framework of…
2024/02/29 14:55
Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be…
2024/02/18 22:54
Daily Troubleshooting of Twin-screw ExtruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be…
2024/02/07 10:08
Submitted successfully
We will contact you as soon as possible
Close